This problem, in short, is the selection of water pumps. The following are the relevant steps for you to choose water pumps from zjbetter. I hope they can help you choose water pumps and help you better. Choose the water pump that suits your project.

1. Confirm the use environment
First understand the environment in which the equipment is used, including temperature, humidity, air pressure, air corrosiveness, dustproof and waterproof requirements, and the level of hazardous areas.
2. Confirm operating conditions
Refers to the liquid surface pressure (absolute) on the suction side of the liquid, the liquid surface pressure on the discharge side, intermittent or continuous work, fixed or mobile position, and the convenience of installation and maintenance.
3. Confirm the nature of the medium
Medium temperature, density, viscosity, saturated vapor pressure, solid particle diameter and content, gas content, corrosiveness, volatility, explosiveness, toxicity.
4. Select the material of the pump wetted parts
According to the physical and chemical properties of the pumped medium above, the material of the flow-passing parts is determined.
5. Determine performance parameters
The performance parameters of the water pump can be determined by calculation, analogy, test and other methods.
6. Determine the installation type
The installation of the pipeline is determined by the layout of the pipeline and the installation site, and there are direct connection, vertical and other types.
8. Determine the number of pumps
In general, spare pumps, especially fire pumps, are set up, and the number of pumps is selected according to different situations.

Fire protection is very important to people's life, which is related to the safety of people's lives and properties. In order to ensure people's fire safety, the government not only has 119 fire alarms, but also has higher requirements for the fire fighting equipment systems of various units. A set of safe and qualified fire-fighting equipment can save people's lives in such critical moments as a fire. The fire pump is a kind of either use it or not, once it is used, its value is far beyond its own. So what fire pump equipment is the safest and most secure?

We all know that when a fire occurs, various situations may occur, the circuit may be damaged, and the equipment may malfunction temporarily. In order to deal with these unexpected factors, fire pump manufacturer zjbetter has developed and produced a relatively safe and guaranteed The equipment, yes, is the fire pump unit.

The main feature of the fire pump set is that it has two kinds of power control, which are diesel engine and electric motor. The electric pump set is put into operation when the mains power is normal. When the power supply fails and the electric fire pump cannot be put into use normally, the diesel engine fire pump set will be put into operation automatically to ensure the supply of fire water. The diesel engine fire pump set can also be equipped with various automatic fire pumps. Function, meet the requirements of the standard, ensure the long-term normal standby state of the equipment, and put it into fire fighting work at any time. The two power supply methods are more reliable to ensure the fire water supply in case of fire emergency.

Zjbetter fire pumps have a wide range of applications, and are suitable for various fire hydrants, sprinkler fire main pumps, fire booster pumps, various villas, residential areas, industrial and civil buildings and other fire protection systems, as well as various oil depots, oil loading and unloading Ports, logistics parks and other places with high fire protection requirements.

The long shaft fire pump is the choice of many customers and plays an important role in people's fire safety. Of course, in order to better play its role, as well as better use and maintain the water pump, some precautions about the long-axis fire pump still need your attention.

Since the fire pump plays a very important role and is related to people's fire safety, when some problems occur during use, it must be paid attention to, so as not to delay the normal use of the fire pump, so that it cannot be started in time when a fire occurs, and the fire extinguishing time is delayed. . When a problem is found, it must be repaired immediately to eliminate the fault and ensure that the equipment is safe and effective before it is put into use, so as to better ensure people's fire safety.
The packing seal is an important part of the water pump. During the use of the fire pump, it is necessary to pay attention to the condition of the packing seal regularly and add it in time, otherwise it will affect the sealing performance of the water pump. Once the fire pump causes water leakage, it will directly affect the power consumption of the motor of the equipment, which will greatly increase the power consumption and damage the impeller of the equipment.
When the equipment generates strong vibration during operation, it is necessary to stop the operation of the equipment, check and repair the fire pump, and eliminate the problem, so as not to cause greater damage to the pump.
Secondly, the impeller is also a relatively important part in the water pump, and the condition of the impeller should be paid attention to regularly when the water pump is running. Regularly check whether there are cracks on the impeller of the water pump, and pay attention to the rust of the impeller. The cracks or rust of the impeller may cause damage and lead to the normal operation of the pump. In addition, in the daily maintenance of the fire pump, it is also necessary to pay attention to whether the fixing of the impeller is loose. At the same time, the mud needs to be repaired regularly to avoid blockage and affect the operation of the pump.
When using a long-axis vertical fire pump, there are still many things that need to be paid attention to. In order to better maintain the water pump and prolong its service life, daily professional maintenance is very important. Shanghai Xizhiquan is a professional fire pump manufacturer. The company produces a complete range of equipment, including fire booster and voltage regulator equipment, diesel engine fire pump sets, single-stage one-stage multi-stage fire pumps, fire control cabinets, etc. Since its establishment 19 years ago, the company has accumulated rich experience in pre-sales and after-sales, guaranteeing high-quality services for customers.

Fire protection system is a necessary equipment for all buildings, enterprises and public places. The performance of various types of models on the market is not the same, and different models are suitable for different scenarios. Fire pump manufacturer zjbetter shares with you what fire pump should be used for high-rise buildings.


First of all, the most basic requirement of high-rise fire-fighting equipment is the need for high lift, which has higher requirements on the carrying capacity and anti-overload capacity of the fire pump. zjbetter recommends the XBD-CDL fire pump produced by our company to you.

In terms of performance, zjbetter improves performance through continuous improvement. The special hydraulic design and structural design are adopted to make it have flow and pressure grading, which is more suitable for the selection of building fire-fighting water supply system than ordinary centrifugal clean water pumps, and the flow-pressure characteristic curve is flat and has no hump.

In the selection of friction parts, the company adopts corrosion-resistant, wear-resistant and anti-engaging materials. This equipment can be configured with dual water outlets, the pump body has a strong bearing capacity, and is more sensitive to start, which can start in a short time, saving more firefighting time.

The equipment has a wide range of applications and can transport medium without particles below 100°C, fire hydrant fire extinguishing systems, automatic sprinkler systems, production water supply systems and buildings, municipal government water supply and drainage in various enterprises and institutions, engineering construction, high-rise buildings, etc. .

zjbetter has certain research and development functions. The company has always focused on product research and development. 60% of the company's more than 400 employees are technicians. Among them, the company currently has 10 senior engineers and 15 engineers. condition. Every year, new products and technologies are born to promote the development of the fire fighting equipment market. Mutual benefit and win-win cooperation are the benchmarks for our tireless expansion of the market, and providing long-term technical support for our partners is the direction we abide by.

A headache for people who don't know much about equipment when purchasing fire fighting equipment is to buy refurbished equipment at the price of a new product, which is not as good as new equipment in terms of performance and value for money. How can you tell if a piece of equipment is refurbished? zjbetter recommends that you understand the following knowledge so that you can avoid stepping on refurbished equipment when purchasing fire pumps.

1、Whether the packaging is standard
Professional manufacturers are more professional in terms of factory, packaging and service. First of all, the packaging is standardized and comes with standardized instructions for product use, installation, use and maintenance, as well as trademarks, models, product nameplate numbers, company addresses and contact numbers, etc., while informal or counterfeit manufacturers do not have such detailed information and the packaging is rougher.

2、Observation of appearance
First of all, observe whether the parts of the product have rust and corrosion, rupture, etc., if there is, it is likely that they are not the original parts. Secondly, observe the details of the production process of the fire pump, observe whether the surface is bright and clean, observe whether the edges and corners of the accessories are intact, if there are gaps in the edges or hidden parts, poor workmanship and so on, it is also possible that the refurbished.

3. Observe the paintwork
If the equipment is refurbished, set aside the surface of the paint can see the old residual paint.

4, the regular fire pump all parts must be intact and complete, in order to ensure the normal and effective operation of the equipment, even a very small sealing accessories, will affect the normal operation of the equipment.

Judging from the surface can only judge part of it, part or need to be used to expose some problems. In short, choosing a reliable manufacturer is one of the most important ways to avoid buying a refurbished machine. A site visit to the factory to understand the strength of the manufacturer can be a close guarantee of the quality of the equipment.

zjbetter has been established for 19 years and has built up deep trust and friendship with new and old customers at home and abroad over a long period of time. The company's production workshop is more than 20,000 square meters and is expanding with the development of the business. The company's product quality is excellent, the company's production and technical personnel are equipped with high professional skills, from the selection of components and assembly processing technology, to ensure that the customer to improve the professional service.

The fire pump manufacturer zjbetter reminds you that the overhaul should first check the power supply, the power supply, the connection of the connector, whether the three-phase power supply is out of phase, the switch, whether the fuse is blown and so on. The circuit is determined to be free of problems before checking whether the pump itself is seeking in mechanical failure. zjbetter has compiled a list of common failures of pumps and methods of elimination for you.

The fire pump is an essential piece of equipment for many companies, and when the equipment fails, it needs to be taken very seriously and the problem needs to be solved in time. First of all, choose a reliable manufacturer to reduce the failure rate of the equipment, when there are some common small problems, as long as you master some quick troubleshooting methods, many can be solved by themselves, of course, in practice to deal with the failure, should be based on the actual situation and operation, do not operate blindly! To avoid causing greater damage to the equipment.